[disks]
1=. ,%DISKLABEL%

[setup]
caption=%INSTCAPTION%
uninstall=%DRVNAME%,%UNINSTDISPLAY%,,%UNINSTCAPTION%
application=PIS_Printer
PIS_Printer="%DRVNAME% Temporary Files",invisible
nt5printer.inf=.,%INFNAME%
nt51printer.inf=.,%INFNAME%
options=/NOPOPUP
EIFVersion=5.40

[LicenseAgreement]
%DRVNAME%=.\%LANG_DIR%\LA\%LA%

[preuninstall.winnt]
%DRVNAME%=%DRVNAME%

[prekickmodule.winnt]
%DRVNAME%=16,",1:E_S3LAC2.EXE,/P '%DRVNAME%' /I:'E_S1LAC2.001'"

[PIS_Printer.winnt]
%DRVNAME%=

[kickmodule.winnt]
%DRVNAME%=0,",DEVICEOP.EXE,/W32 /LANG /MSG:2000 /MFG:'%MFG%' /DES:'%DRVNAME%' /MDL:'%MDL%' /DRV /PNP /INF /SDP /P:'USB' /P:'LPT',"

[message.winnt]
1013=%1013%
1000=%1000%
2000=%2000%
2001=%2001%
2002=%2002%
2010=%2010%
2011=%2011%
2012=%2012%

[message]
1100=%1100%

[progman.url.winnt]
%DRVNAME%="EPSON,0x17",,PIS_Printer,%TSURL%,%URLSCNAME%,,,,

[addregistry.winnt]
%DRVNAME%="0x80000002",1,"%UNINSTKEY%\PrinterDrivers\%DRVNAME%\Files\Extension\0",ProfilePath,"@@0x17\EPSON"
%DRVNAME%="0x80000002",1,"%UNINSTKEY%\PrinterDrivers\%DRVNAME%\Files\Extension\0",FileSpec,"%URLSCNAME%.URL"
%DRVNAME%="0x80000002",4,"%UNINSTKEY%\PrinterDrivers\%DRVNAME%\Files\Extension\0",Type,"0x00000124"
%DRVNAME%="0x80000002",3,"%UNINSTKEY%\PrinterDrivers\%DRVNAME%\Files\Extension\0",Flags,"0x00000001"

[Strings]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_EN.HTM"
INFNAME="E_GF19SE_ENGLISH.INF"
INSTCAPTION="EPSON Printer Utility Setup"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="EPSON Printer Software"
UNINSTCAPTION="EPSON Printer Utility Uninstall"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Technical Support"
1100="This printer cannot be used with your current operating system"
1000="Setup is complete."
1013="Setup is complete. Please reboot your system."
2000 = "Printer driver installation and port configuration were completed successfully."
2001 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, change the printer port as necessary."
2002 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, change the printer port as necessary."
2010 = "Printer driver installation and port configuration were completed successfully.\n\nRestart your computer."
2011 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, restart your computer and then change the printer port as necessary."
2012 = "The printer port is set to %PORT%.\n\nTo use the printer on a network, restart your computer and then change the printer port as necessary."
LANG_DIR= "ENGLISH"

[Strings.0007]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_DE.HTM"
INFNAME="E_GF19SE_DEUTSCH.INF"
INSTCAPTION="EPSON-Software-Installation"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="EPSON-Drucker-Software"
UNINSTCAPTION="Deinstallation für EPSON-Drucker-Utilities"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Technischer Support"
1100="Dieser Drucker kann unter dem aktuellen Betriebssystem nicht verwendet werden."
1000="Die Installation ist abgeschlossen."
1013="Die Installation ist abgeschlossen. Starten Sie Ihr System neu."
2000="Die Installation des Druckertreibers und die Konfiguration der Schnittstelle wurden erfolgreich abgeschlossen. "
2001="Der Druckeranschluß wird auf  %PORT% festgelegt.\n\nUm den Drucker in einem Netzwerk zu verwenden, ändern Sie, wenn notwendig, den Druckeranschluß."
2002="Der Druckeranschluß wird auf  %PORT% festgelegt.\n\nUm den Drucker in einem Netzwerk zu verwenden, ändern Sie, wenn notwendig, den Druckeranschluß."
2010="Die Installation des Druckertreibers und die Konfiguration der Schnittstelle wurden erfolgreich abgeschlossen. \n\nStarten Sie Ihren Computer neu."
2011="Der Druckeranschluß wird auf  %PORT% festgelegt.\n\nUm den Drucker in einem Netzwerk zu verwenden, starten Sie Ihren Computer neu und ändern Sie anschließend den Druckeranschluß, wenn notwendig."
2012="Der Druckeranschluß wird auf  %PORT% festgelegt.\n\nUm den Drucker in einem Netzwerk zu verwenden, starten Sie Ihren Computer neu und ändern Sie anschließend den Druckeranschluß, wenn notwendig."
LANG_DIR= "DEUTSCH"

[Strings.000A]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_ES.HTM"
INFNAME="E_GF19SE_ESPANOL.INF"
INSTCAPTION="Utilidad de instalación de Impresora EPSON"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="Software de impresora EPSON"
UNINSTCAPTION="Desinstalador de impresora EPSON"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="Soporte Técnico EPSON Stylus Photo R2400"
1100="Esta impresora no se puede utilizar con su actual sistema operativo."
1000="Instalación finalizada."
1013="Instalación finalizada. Reinicie el sistema"
2000="La instalación del driver de la impresora y la configuración del puerto han finalizado con éxito."
2001="El puerto de la impresora está ajustado a %PORT%.\n\nPara usar la impresora en una red, cambie el puerto de la impresora al necesario."
2002="El puerto de la impresora está ajustado a %PORT%.\n\nPara usar la impresora en una red, cambie el puerto de la impresora al necesario."
2010="La instalación del driver de la impresora y la configuración del puerto han finalizado con éxito.\n\nReinicie su ordenador."
2011="El puerto de la impresora está ajustado a %PORT%.\n\nPara usar la impresora en una red, reinicie el ordenador y cambie el puerto de la impresora al necesario."
2012="El puerto de la impresora está ajustado a %PORT%.\n\nPara usar la impresora en una red, reinicie el ordenador y cambie el puerto de la impresora al necesario."
LANG_DIR= "ESPANOL"

[Strings.000C]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_FR.HTM"
INFNAME="E_GF19SE_FRANCAIS.INF"
INSTCAPTION="Installation des utilitaires d'imprimante EPSON"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="EPSON Logiciel imprimante"
UNINSTCAPTION="EPSON Désinstallation des utilitaires"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Support technique"
1100="Cette imprimante ne peut être utilisée avec ce système d'exploitation."
1000="L'installation est terminée."
1013="L'installation est terminée. Veuillez réinitialiser votre système."
2000="L'installation du pilote d'impression et la configuration du port se sont terminés correctement."
2001="Le port d'imprimante est défini sur %PORT%.\n\nPour utiliser l'imprimante sur un réseau, modifiez le port d'imprimante en conséquence.  "
2002="Le port d'imprimante est défini sur %PORT%.\n\nPour utiliser l'imprimante sur un réseau, modifiez le port d'imprimante en conséquence.  "
2010="L'installation du pilote d'impression et la configuration du port se sont terminés correctement.\n\nRedémarrez votre ordinateur."
2011="Le port d'imprimante est défini sur %PORT%.\n\nPour utiliser l'imprimante sur un réseau, redémarrez votre ordinateur puis modifiez le port d'imprimante en conséquence.  "
2012="Le port d'imprimante est défini sur %PORT%.\n\nPour utiliser l'imprimante sur un réseau, redémarrez votre ordinateur puis modifiez le port d'imprimante en conséquence.  "
LANG_DIR= "FRANCAIS"

[Strings.0010]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_IT.HTM"
INFNAME="E_GF19SE_ITALIANO.INF"
INSTCAPTION="Setup Utility Stampanti EPSON"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="Software per stampante EPSON"
UNINSTCAPTION="Utility di disinstallazione EPSON"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Assistenza tecnica"
1100="Questa stampante non può essere usata con il sistema operativo correntemente attivo."
1000="Installazione completata."
1013="Installazione completata. Riavviate il sistema."
2000="Installazione del driver di stampante e configurazione della porta completate correttamente."
2001="La porta stampante è impostata a %PORT%.\n\nPer utilizzare la stampante in rete, modificate la porta stampante al valore appropriato."
2002="La porta stampante è impostata a %PORT%.\n\nPer utilizzare la stampante in rete, modificate la porta stampante al valore appropriato."
2010="Installazione del driver di stampante e configurazione della porta completate correttamente.\n\nRiavviate il computer."
2011="La porta stampante è impostata a %PORT%.\n\nPer utilizzare la stampante in rete, riavviate il computer e quindi modificate la porta stampante al valore appropriato."
2012="La porta stampante è impostata a %PORT%.\n\nPer utilizzare la stampante in rete, riavviate il computer e quindi modificate la porta stampante al valore appropriato."
LANG_DIR= "ITALIANO"

[Strings.0013]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_NL.HTM"
INFNAME="E_GF19SE_NEDERLND.INF"
INSTCAPTION="EPSON Installatie van printerhulpprogramma's"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="EPSON-printersoftware"
UNINSTCAPTION="EPSON Installatie van printerhulpprogramma's ongedaan maken"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Technische ondersteuning"
1100="Deze printer kan met het actuele besturingssysteem niet gebruikt worden."
1000="Setup is voltooid."
1013="Setup is voltooid. Start het systeem opnieuw op."
2000="De installatie van de printerdriver en de poortconfiguratie is voltooid."
2001="De printerpoort is ingesteld op %PORT%.\n\nWijzig indien nodig de printerpoort om de printer in een netwerk te kunnen gebruiken."
2002="De printerpoort is ingesteld op %PORT%.\n\nWijzig indien nodig de printerpoort om de printer in een netwerk te kunnen gebruiken."
2010="De installatie van de printerdriver en de poortconfiguratie is voltooid.\n\nStart uw computer opnieuw op."
2011="De printerpoort is ingesteld op %PORT%.\n\nStart uw computer opnieuw op om de printer in een netwerk te kunnen gebruiken. Wijzig vervolgens indien nodig de printerpoort."
2012="De printerpoort is ingesteld op %PORT%.\n\nStart uw computer opnieuw op om de printer in een netwerk te kunnen gebruiken. Wijzig vervolgens indien nodig de printerpoort."
LANG_DIR= "NEDERLND"

[Strings.0016]
MFG="EPSON"
MDL="Stylus Photo R2400"
DRVNAME="EPSON Stylus Photo R2400"
DISKLABEL="EPSON Stylus Photo R2400"
LA="LA_PT.HTM"
INFNAME="E_GF19SE_PORTUGAL.INF"
INSTCAPTION="Utilitário EPSON de Configuração da Impressora"
UNINSTKEY="SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\EPSON Printer and Utilities"
UNINSTDISPLAY="Software para Impressoras EPSON"
UNINSTCAPTION="Utilitário Uninstall para Impressoras EPSON"
TSURL="http://support.epson.net/index.htm?product=Stylus_Photo_R2400"
URLSCNAME="EPSON Stylus Photo R2400 Assistência Técnica"
1100="Esta impressora não pode ser utilizada com o seu sistema operativo actual."
1000="A instalação está completa."
1013="A instalação está completa. Reinicie o sistema."
2000="A instalação do controlador da impressora e a configuração da porta foram bem sucedidas."
2001="A porta da impressora está configurada para %PORT%.\n\nPara utilizar a impressora em rede, seleccione a porta adequada."
2002="A porta da impressora está configurada para %PORT%.\n\nPara utilizar a impressora em rede, seleccione a porta adequada."
2010="A instalação do controlador da impressora e a configuração da porta foram bem sucedidas.\n\nReinicie o computador."
2011="A porta da impressora está configurada para %PORT%.\n\nPara utilizar a impressora em rede, reinicie o computador e seleccione a porta adequada."
2012="A porta da impressora está configurada para %PORT%.\n\nPara utilizar a impressora em rede, reinicie o computador e seleccione a porta adequada."
LANG_DIR= "PORTUGAL"

